How to Select a Vacuum Method on PRIMUS Steam Sterilizers
Water Ejector Overview The standard water ejector produces the vacuum required to pull air from the chamber through the use...
How to Set the Date and Time on PRIMUS PSS500 Control System
Setting Time / Date Have a question or having difficulties? Talk to Dave Schall, our PRIMUS sterilizer expert who is here...
What Features do PRIMUS Control Systems Offer?
PSS5 PSS6 PSS7 PSS8 – Trinity PSS9 Have a question or having difficulties? Talk to Dave Schall, our PRIMUS sterilizer expert...
What is the Serial Data Output (RS-232) on PRIMUS Steam Sterilizers?
RS-232 Overview In telecommunications, RS-232 is the traditional name for a series of standards for serial binary single-ended data and...
How to Establish a Basic Vacuum Cycle Using the PRIMUS PSS5 Controller
NoteThe following instructions assume a PSS5 control system on a PRIMUS sterilizer or a retrofitted PSS5 control kit. Primary Settings...
How to Establish a Standard Liquid Load for a PRIMUS Steam Sterilizer Cycle
Overview Liquids can be problematic in steam sterilization because they can take considerably longer to heat up than most other...
How to Create Cycles Using the Copy Function on the PRIMUS PSS8 Trinity Control System
Overview: Setting up a new cycle for a sterilizer can be a time-consuming task as there are a large number...
What are the PRIMUS PSS9 Cycle Settings for Factory Acceptance Testing (FAT)?
Introduction The PRIMUS Pri-Matic® control system’s first three cycle recipes (i.e., the cycle parameter data) are programmed during the PRIMUS...
How to Retain PRIMUS Sterilizer Cycle Data Using an RS232 Serial Port
The information concentrates on how to retain PRIMUS sterilizer cycle data using the standard program (HyperTerminal) available to anyone using...